Latest

Post Top Ad

Your Ad Spot

Saturday, September 23, 2023

Samsung A135F All Binary Factory Reset Odin 4 File

Samsung A135F U1 U2 U3 U4 4Files Firmware

Performing a factory reset using Odin and 4 files on a Samsung device typically involves flashing a stock firmware. Please be aware that this process can be risky and may result in data loss or even bricking your device if not done correctly. Make sure you have a backup of your important data before proceeding. Also, ensure you have the correct firmware files for your specific Samsung A135F model. Here are the general steps to perform a factory reset using Odin and 4 files:

Samsung A135F All Binary Factory Reset Odin 4 File

**Note:** This process may void your warranty and can be complex, so proceed with caution.


1. **Download Necessary Files:**

   - Download & install Samsung USB drivers on your PC.

   - Download the latest stock firmware for your Samsung A135F model from a reputable source. Ensure that it includes four files: AP, BL, CP, and CSC.

   - Download and extract the Odin flashing tool on your computer.


2. **Put Your Device in Download Mode:**

   - Turn off your Samsung A135F.

   - Press and hold the Volume Down + Power buttons simultaneously until you see a warning screen.

   - Press the Volume +Up button to enter Download Mode.

3. **Open Odin:**

   - Run Odin on your computer with administrator privileges by right-clicking the Odin executable and selecting "Run as administrator."

4. **Connect Your Device:**

   - Connect your Samsung A135F to your computer using a USB cable. Odin should recognize your device. You'll see an "Added!" message in the Odin log.

5. **Load Firmware Files:**

   - In Odin, click on the following buttons and select the corresponding firmware files:

     - Click the "AP" button and select the firmware file with the "AP" in its name.

     - Click the "BL" button and select the firmware file with the "BL" in its name.

     - Click the "CP" button and select the firmware file with the "CP" in its name.

     - Click the "CSC" button and select the firmware file with the "CSC" in its name.

6. **Configure Odin:**

   - Make sure that only "Auto Reboot" and "F. Reset Time" options are selected in Odin. Do not select the "Re-Partition" option unless you have a specific reason to do so.


7. **Start the Flashing Process:**

   - Double-check that everything is set correctly Then

   - Click the "Start" button in Odin v3 to begin the firmware flashing process. This may take a few minutes.

8. **Wait for Completion:**

   - Once Odin displays a "Pass!" message and your device reboots, the flashing process is complete.

9. **Factory Reset:**

   - After your device boots up, it should be running a clean version of the firmware. You can now set it up as a new device or restore your data from a backup.

Remember that this process can be risky, and it's essential to use the correct firmware for your device to avoid issues. If you're not comfortable with these steps or are unsure about the firmware files, it's a good idea to seek assistance from a professional or Samsung support.

Download Below Links

Samsung A135F Factory Reset File

-----------------------------------------------------------------------------------------------------------------------------
samsung a12 factory reset not working,samsung a12 factory reset not showing,samsung a12 factory reset not show,samsung a12 factory reset not showing 2022,how to reset samsung mobile,samsung,hard reset samsung a13,a12 factory reset not showing,factory reset samsung,mobile ko factory reset kaise kare,samsung a12 hard reset not working,samsung a12 factory option not show,not showing hard reset option samsung a201s 2021,samsung a13 a135f factory reset
Related Posts

No comments:

Post a Comment

Contact Us

Name

Email *

Message *

★彡[ʙᴀᴄʜᴀ ɪʀꜰᴀɴ]彡★

Post Top Ad

Your Ad Spot

Pages